Beds metal frames vary in size and the specific design, but are usually quite simple assembling. If you have special instructions for your frame, use this as a basic guide. Set the two rails in the floor where you want to go to bed. If you have metal frame header clamps, you connect them to the upper end of each rail, using bolts or screws. Full Size Metal Bed Frame – If full size metal bed frame involves cross wires, pulls them diagonally through the space between the two rails, and connect them to their appropriate slots.
Measure the full size metal bed frame with a tape measure to make sure that the mattress fits snugly inside the rails. If the measurements are wrong, it’s time to make corrections. Put casters, wheels or sliding into their proper clamps. Specifications vary depending on the particular type of bed you have, but all should be secured to the brackets.
Secure the brackets to the four ends of the rails, using bolts or screws. Try them putting pressure on the contact points to ensure that support the weight of the mattress. Place the caps on the ends of the rails. Will prevent the sheets caught in the full size metal bed frame.