Futon Bunk Beds – Building a bunk bed that supports a futon mattress is in many respects the same as for a regular bunk mattress. The only difference is that their platforms support must be able to withstand all the futon bunk beds. Sets a rectangle using all beams 188 cm and 96.5 cm. Place the short beams in long beams with all the beams located on their narrow sides. Connect the rectangle with two screws at each corner, piercing through the faces of the beams 188 cm and at the ends of the beams 99 cm.
Establishes a plywood sheet on top of the frame with the sheet edges flush with the edges of the frame. Weapon four support posts about where will the corners of the futon bunk beds; with holes parallel to what will be the long side of the bunk. The two poles with the larger hole should be at the far wall with the big hole in the top side.
Tighten the nuts with your tweezers. The other platform positioned on top of the first platform. Lifts up and put bolts in place with the top row of holes. A futon bunk beds mattress placed on top of each platform. Slide the pin through the whole 3.7 cm in diameter, forming a safety rail for the top bunk.