How to Build Bed Frame with Drawers


A bed frame with drawers underneath will provide a base frame under your bed as well as a comfortable or just extra storage space. Remember measures have on hand or mattress that you are placing on future bed. The base board should be about an inch and a half larger than the mattress to make it easier to reach the drawers. First of all, you get to the dresser drawers. You can take them to other furniture or make them yourself using four wooden slats for each drawer and a large plate for background.

Start building the base of the bed to enter the bed frame with drawers. This base will be the wooden frames that support the mattress. Use lifting lugs to bed if you want to leave more space under the bed for larger drawers. Taking the measure of this space and then moves the bed to the side to support the frame.

RELATED :   Making Low Profile Bed Frame

Use four thick and sturdy pieces of wood for the bed frame with drawers. Make sure these parts are higher than the drawers so that they slide in and out easily. Adjust screw these four pieces. Then use another thick and sturdy wooden board to pass through the central part of the frame.

How to Build Bed Frame with Drawers

A bed frame with drawers is ideal for small spaces or anyone who has a lot of things to keep solution, but not enough space to put everything. Because in the drawers can store bedding, clothing or other items, a bed with drawers eliminates the need for a comfortable in the room. As a result, small bedrooms and guest rooms can accommodate a larger bed, without having to worry about other furniture not fit.

RELATED :   Queen Size Bed Frames Design

Bed frame with drawers cut four 2 by 4 lumber 75 inches (5.08 by 10.16 by 190.5 cm) long with a saw circular. Cut four 2 by 4 54 inches (5.08 10.16 137.16 cm) long and seven 2 by 4 10 inches (5.08 25.40 10.16 cm) long. Cut a 2 by 4 by 71 inches (10.16 by 5.08 by 180.34 cm) long and two 2 by 4 by 16 inches (10.16 by 5.08 by 40.64 cm).

Bed frame with drawers, place a pilot bearing 1 inch (2.54 cm) to your router. A groove cut 1 inch (2.54 cm) deep at the edges of two of the 75 inch (190.5 cm) length of 2 by 4 (5.08 by 10.16 cm) pieces. Apply wood glue to cut slots. Fixed ends attached to the ends of two pieces of 54 inches (137.16 cm) long so that one cuts square by 1 inch (2.54 by 2.54 cm) previously made fit to form a rectangle. Slots 1 inch (2.54 cm) cut with the router must be faced in the box.

RELATED :   Wooden Pallet Bed Frame Coffee Table

Comments are closed.